3-56
Preparation
Communication Tab (MA2001w/MA2000w only)
No. Item Description
1 Host name Enter the host name of the machine.
MAX characters: 16
2 TCP/IP Select the check box to enable the DHCP protocol. Enter the IP address, Subnet
mask, and Default gateway values.
3SNMP Select the check box to enable the SNMP protocol, and then select SNMP protocol
options. The SNMP protocol is used for providing and transferring management
information within the network environment. Read community and Write community
can have up to 16 characters. The default community is public. Type sysContact,
sysName, and sysLocation information up to 32 characters. Select Enable
authentication to activate machine authentication.
To Next Page
Loading...
