To Next PageTo Next Page
Need help?Do you have a question about the Kyosho FW-06 and is the answer not in the manual?
General| Brand | Kyosho |
|---|---|
| Model | FW-06 |
| Category | Motorized Toy Car |
| Language | English |
Emphasizes that the radio control model is not a toy and requires careful handling.
Advises taking sufficient safety measures before operating the model.
Instructs on correct battery connection, avoiding reversal and disassembly.
Advises against operating the model on public roads, crowded places, or near children.
Warns against using the same frequency as others to avoid losing control and accidents.
Lists specific places and situations where operating the model is prohibited.
Emphasizes the importance of checking radio batteries for proper operation.
Provides crucial safety guidelines for handling fuel, including location and storage.
Advises against inserting fingers or objects into rotating or moving parts.
Provides warnings about battery terminals and notes on battery compatibility.
Warns that completely discharged batteries can lead to loss of model control.
Provides step-by-step instructions for adjusting the needle valve.
Explains how to set the idle mixture screw for proper idle speed.
Lists essential checks to perform before starting the engine and model.
Warns against high RPM operation during break-in to prevent severe damage.
Guides starting the engine as per the 'Way of Starting Engine' chapter.
Details setting the idle adjustment screw for the break-in process.
Instructs on running the car and adjusting the needle valve during break-in.
Defines the completion criteria for the engine break-in procedure.
Describes the typical needle valve setting for normal engine operation.
Details setting the needle valve for maximum engine RPM.
Explains how to adjust the idle mixture screw for optimal low-speed performance.
Instructs to drain fuel from the tank after each use to prevent issues.
Emphasizes engine tuning before adjusting gear shift timing.
Guides the adjustment of gear shift timing based on engine and track.
Recommends gradual adjustment of shift timing for optimal results.
