●
Preparations required before use
◆
Connect ICS USB adapter and install the software driver
（
This enables the ICS USB Adapter to work on your computer
）
・
Plug the ICS USB Adapter into the USB port on the computer. The USB adapter may not function
properly if using a USB hub or a USB extension cable.
・
If there is more than one USB port on your computer, try to use the same USB port for the USB
Adapter each time. Using a different port may require the software driver to be re-installed.
・
These instructions relate to standard computer screen settings and may differ according to your
computer setup or customized screen settings.
1.Connect the ICS USB Adapter directly to the USB port on the computer.
2. Click on the text balloon.
・
A window with the Found New Hardware Wizard should then be displayed.
・
‘Found New Hardware Wizard’ should appear in a text balloon on the screen.
・If your computer is not connected to the inter-
net, the screen to the left will not be displayed.
Proceed to step 4.
3. Choose ‘No, do not connect at this time’ and then click Next.
2
To Next Page
Loading...
Need help?
General