Operation
AFL/PFL (CUE BUS)
The CUE BUS page displays PFL in the stacked view 1, and AFL in the stacked view 2 (refer to Stacked views (p.32)).
By default, the CUE BUS is routed to the monitor headphones. AFL and PFL allow isolating one or several input signals to
monitor sound and mix quality for tuning purposes.
PFL (Pre-Fader Listening)
Select the input(s) to send to the CUE BUS.
All selected signals are summed. Input or DSP BUS gain is not applied.
AFL (After-Fader Listening)
Select the DSP BUS input(s) to send to the CUE BUS.
All selected signals are summed. Input and DSP BUS gain are applied.
P1 user manual (EN) version 2.1 45
To Next Page