L-Acoustics P1 - Page 74

Specications
Latency
Input to output (passthrough propagation delay) 0.5 ms (from analog or AES/EBU input to any analog or AES/EBU
output)
DSP propagation delay 0.37 ms
Time-aligned redundant audio distribution AES/EBU and ANALOG: always time-aligned
Can be time-aligned to AVB upon user selection for connection to
LA4X/LA12X/P1
Sample Rate Converter (SRC)
Sampling frequency 96 kHz
Word length 24 bits
Dynamic range 140 dB
Distortion THD+N < -120 dBfs
Bandpass ripple ±0.05 dB (20 Hz - 40 kHz, 96 kHz)
Automatic fallback option
Mode AVB to AES, ANA or MIC
AES to ANA or MIC
Switchover conditions AVB: loss of "locked" status
AES: no clock, loss of lock, CRC error, bipolar encoding error or
dataslip
Constant group delay AES to ANA or MIC: independent from input Fs
AVB to AES, ANA or MIC: upon user selection if source is another
P1
Constant level upon manual user selection of gain, independent from input Fs
Revert to initial input upon manual user selection
Headphones
Minimum load 32 Ω
Distortion THD+N ratio 0.007%, 1 kHz, -20 dBFS, 20 kHz bandwidth at 32 Ω load
0.004%, 1 kHz, -10 dBFS, 20 kHz A-weighted at 600 Ω load
Power 110 mW left + 110 mW right at 32 Ω to 600 Ω load
Signal generator
Signal types sine wave, sine bursts, 20 Hz-20 kHz sweep, white noise, pink noise
Peak level from -75 dBFS to 0 dBFS by steps of 0.1 dB
74 P1 user manual (EN) version 2.1