L-Acoustics SB15P Product Information

COMPACT SELF-POWERED SUBWOOFER
PRODUCT INFORMATION - VERSION 2.0
w w w . l - a c o u s t i c s . c o m
SB15P SELF-POWERED SUBWOOFER ENCLOSURE
The SB15P subwoofer is the recommended low-frequency extension for the 108P and 112P self-powered enclosures.
It allows extending the system operating range down to 40 Hz.
The SB15P contains a 15’’ direct radiating LF transducer integrated into a bass-reflex tuned enclosure with optimal size
to tuning-frequency ratio. The 15’’ speaker provides exceptional power handling and cone excursion capabilities with
the added benefits of low thermal compression and reduced distortion. Efficiently driven and protected by the
embedded amplification and DSP module, the SB15P will deliver an exceptionally high SPL level. The tuning approach
optimizes the temporal behavior of the enclosure and maintains the inherent musicality and definition characteristics at
the very highest operating levels. The SB15P cabinet is made of first grade Baltic birch plywood to ensure maximum
acoustical and mechanical integrity.
Its design makes the SB15P perfectly suited to various sound reinforcement applications. The SB15P features a pole-
mount socket for the 108P or 112P enclosure, allowing visually elegant front-of-house or side fill coupling. The ETR15P
bracket can be used for flown configurations attached to a rigging structure, a wall or a ceiling.
USING THE SB15P
Refer to the P series operator manual for the operating modes and the loudspeaker connection.
RIGGING THE SB15P
Refer to the P series operator manual or to the XT/P series rigging manual for the rigging procedures
and the safety limits.
EC DECLARATION OF CONFORMITY
L-ACOUSTICS
®
13 rue Levacher Cintrat
Parc de la Fontaine de Jouvence
91462 Marcoussis Cedex FRANCE
States that the following product:
SB15P enclosure.
Is in conformity with the provisions of:
2006/42/EC: Machinery Directive;
2006/95/EC: Low Voltage Directive;
2004/108/EC: Electromagnetic Compatibility Directive.
Applied rules and standards
1
:
EN ISO 12100-1: 2004: Safety of machinery;
EN60065: Safety requirements for audio, video
and similar electronic apparatus.
EN55103-1: Electromagnetic interference (Emission), E2 ;
EN55103-2: Electromagnetic interference (Immunity), E2.
Established at Marcoussis, France,
May 4
th
, 2006
Christophe PIGNON,
Research & Development Director
1
Please refer to rigging manual dedicated to XT Range and P
Series for the authorized configurations

L-Acoustics SB15P Specifications

General

Brand	L-Acoustics
Model	SB15P
Category	Speaker System
Language	English