Need help?Do you have a question about the L-Acoustics 112P and is the answer not in the manual?
Key safety precautions for preventing harm and product damage during operation.
Cautions regarding moisture, heat, and electrical grounding for safe product use.
Introductory message and thanks for purchasing the L-Acoustics P Series system.
Overview of the manual's structure, detailing chapters and sections.
General introduction to L-Acoustics P Series loudspeakers and their capabilities.
Explanation of presets for 108P and 112P, including mode descriptions.
Details SB15P presets and polarity settings for optimal system integration.
Comprehensive technical description of the 108P loudspeaker model.
Comprehensive technical description of the 112P loudspeaker model.
Comprehensive technical description of the SB15P subwoofer model.
Information on rear panel connectors, power cables, and signal connections.
Guidelines for aiming P Series enclosures for optimal audience coverage.
Principles for distributed sound reinforcement and enclosure spacing.
Using the 108P as a nearfield monitor, including preset selection.
Using the 112P as a floor monitor, including setup and presets.
Step-by-step guide for attaching the ETR8-2 U-bracket to the 108P.
Step-by-step guide for attaching the ETR112XT U-bracket to the 112P.
Instructions for attaching the XTLIFTBAR for rigging the 112P.
Step-by-step guide for attaching the ETR15P U-bracket to the SB15P.
Critical safety rules for rigging and mounting P Series loudspeakers.
Guide to powering up, connecting signals, and selecting presets for P Series loudspeakers.
Detailed technical specifications for the L-Acoustics 108P loudspeaker.
Detailed technical specifications for the L-Acoustics 112P loudspeaker.
Detailed technical specifications for the L-Acoustics SB15P subwoofer.
Instructions for returning products for factory service and repair.
Conformance details for Low Voltage, EMC, and Electrical Safety directives.
Key safety precautions for preventing harm and product damage during operation.
Cautions regarding moisture, heat, and electrical grounding for safe product use.
Introductory message and thanks for purchasing the L-Acoustics P Series system.
Overview of the manual's structure, detailing chapters and sections.
General introduction to L-Acoustics P Series loudspeakers and their capabilities.
Explanation of presets for 108P and 112P, including mode descriptions.
Details SB15P presets and polarity settings for optimal system integration.
Comprehensive technical description of the 108P loudspeaker model.
Comprehensive technical description of the 112P loudspeaker model.
Comprehensive technical description of the SB15P subwoofer model.
Information on rear panel connectors, power cables, and signal connections.
Guidelines for aiming P Series enclosures for optimal audience coverage.
Principles for distributed sound reinforcement and enclosure spacing.
Using the 108P as a nearfield monitor, including preset selection.
Using the 112P as a floor monitor, including setup and presets.
Step-by-step guide for attaching the ETR8-2 U-bracket to the 108P.
Step-by-step guide for attaching the ETR112XT U-bracket to the 112P.
Instructions for attaching the XTLIFTBAR for rigging the 112P.
Step-by-step guide for attaching the ETR15P U-bracket to the SB15P.
Critical safety rules for rigging and mounting P Series loudspeakers.
Guide to powering up, connecting signals, and selecting presets for P Series loudspeakers.
Detailed technical specifications for the L-Acoustics 108P loudspeaker.
Detailed technical specifications for the L-Acoustics 112P loudspeaker.
Detailed technical specifications for the L-Acoustics SB15P subwoofer.
Instructions for returning products for factory service and repair.
Conformance details for Low Voltage, EMC, and Electrical Safety directives.
General| Frequency Response | 50 Hz - 20 kHz |
|---|---|
| Coverage angle (-6 dB) | 90° conical |
| Coverage | 90° conical |
| LF Driver | 12" |
| Input | Analog |
| Input Connectors | XLR |
| Type | Active 2-way coaxial system |
| Transducers | 12" woofer, 1.4" compression driver |
To Next Page
