L-Acoustics 112P - 6.2 112 P SPECIFICATIONS

L-ACOUSTICS P Series Manual V2.1 7/12/2007 32
6.2 112P SPECIFICATIONS
ACOUSTICAL PERFORMANCE
Frequency Response
Frequency response: 60 – 18k Hz (± 3 dB) (FILL preset)
Usable bandwidth: 50 – 20k Hz (-10 dB)
System Sensitivity
-21 dBu (0.071 Vrms) 96 dB SPL 60 – 18k Hz (FILL preset)
Nominal Directivity (-6 dB)
Axi-symmetrical 90° (± 20°)
System Output SPL
One enclosure 121dB (cont) 131 dB (peak) FILL preset
119 dB (cont) 129 dB (peak) XOVER preset
FILL preset provides nominally flat response under freefield conditions
XOVER preset applies a 100 Hz high pass filter and a 3 dB high frequency shelving eq contour
Components
LF 1 x 12” weather resistant loudspeaker (3” voice coil)
HF 1 x 1.4” exit compression driver (titanium diaphragm, 3” voice coil, coaxial assembly)
ELECTRICAL PERFORMANCE
Input
Type Electronically balanced (pin 2 hot)
Max Input Level +12 dBu (gain potentiometer at 0 dB position)
DSP
Sampling 24 bit / 48 kHz
Dynamic Range > 105 dBA
Amplifier
Output Power 1 x 1000 W (8 ohms)
Gain 32 dB
Enclosure
Height 540 mm 21.3 in
Width 416 mm 16.4 in
Depth 390 mm 15.4 in
Floor Monitor Angle 30 degrees with respect to vertical
Net Weight 32.2 kg 70.9 lbs
Shipping Weight 35.5 kg 78.2 lbs
Shipping Dimensions 615 x 470 x 465 mm
24.2 x 18.5 x 18.3 in
Connectors 2 x XLR, 2 x Power Con (input, loop through)
Material 18 mm, 30 mm Baltic birch plywood
Finish Maroon-gray™
Grill Black epoxy perforated steel with acoustically-transparent, technically-
advanced grille cloth
Rigging Integrated pole mount socket,
adjustable U-bracket and liftbar accessories available