Page 4
1.0 INTRODUCTION
The MPX10 is a single channel processor designed for one step
processing of vocal or solo instruments where the highest quality signal
path is required. The MPX10 combines a Mic/Line preamplifier with DI
input, Noise Reduction, 4 mode Auto Compressor and Equaliser in a
compact 1U case.
The MPX10 is an ideal front end for direct to tape or hard disk recorders
and as a superior analogue input stage for digital work stations. The MPX10
is equally at home in sound reinforcement applications where it can provide
feedback suppression, vocal levelling and comprehensive tone shaping.
Features include -
• Balanced Line and Microphone inputs (with +48V phantom power)
• High impedance (0.5M) DI input
• High and low pass filtering
• Downward expander Noise Reduction
• Auto Compressor with variable Threshold, Ratio and Gain
• In-built De-ess function
• HF and LF shelving EQ
• 2 parametric mid range sections with Gain, Frequency and Q controls
• Output level adjust
• Gain Reduction and Output metering
• Ground compensated outputs at +4dBu and -10dBV
• Input and output break jacks for the Input, Compressor, EQ and output
sections
This last feature allows the user to re-configure the MPX10's signal path
such as putting the EQ before the Compressor. It also means that the
MPX10 can be used as 4 separate signal processors -
• High quality, low noise Mic, Line, DI preamplifier
• Downward expander and auto Attack/Release compressor
• 4 band Equaliser
• Variable gain line driver with level metering
To Next Page
Loading...