Page 3Page 2
Find your full manual and product information here: bit.ly/laxtech_support
POWER UP
AA
AA
• The station will search for WWVB Atomic Time Signal at UTC:
07:00 and if no reception was found, your station will search
again at 08:00, 09:00, 10:00 and 11:00.
• Press the SET button to start or stop a search for the WWVB
Atomic Time Signal.
• For information about WWVB Atomic Time visit: bit.ly/AtomicTime
1. Insert 2 “AA” batteries into your Outdoor Sensor.
2. Insert the 5.0 Volt Power Cord into an outlet, then into your
Weather Station. Optional: Install 3 “AA” Batteries into your
station for backup.
3. Once the Sensor is reading to your station, place the sensor
outside in a shaded location to protect from sun’s heat.
Watch sensor mounting video: bit.ly/TH_SensorMounting
ATOMIC TIME SIGNAL-WWVB
Outdoor Sensor
TX141TH-Bv3
Weather Station
C85845v4
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust, and SET to confirm.
3. Press the SNOOZE/BACKLIGHT button at any time to exit.
Settings Menu Order:
• Language (English, Espanol)
• Beep ON/OFF
• Atomic ON/OFF
• Time Zone
• DST ON/OFF
• 12H/24H time
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit/Celsius
Weekday: Weekday sets automatically as Year, Month and Date are
set.
Language: Whichever language is selected, the following instructions,
weekday, and month will appear in that language.
Atomic OFF: When Atomic OFF is selected, move directly to 12/24
hour time format.
Time Zones
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
SETTINGS
Wireless Color Weather Station
Quick Start Guide
MODEL: C85845v4
DC:021720
AA
AA
AA
INDOOR | OUTDOOR COMFORT CHARTS
• The Comfort Charts keep you informed when
humidity is at a comfortable level.
• The bar over the chart will move to indicate
the humidity level.
To Next Page
Need help?
General
