05 06
LCD Display Brightness Display Modes
Adjusting the LCD Display Brightness
Selecting the Display Mode
Auto-Dim Settings
Press the SNOOZE/LIGHT button on the top of the
station to adjust the backlight intensity. There are 4
brightness levels, plus an o option.
Press the SET button on the back of the station
to select a display mode. The Station will stay
on selection.
1.
2.
3.
4.
Hold the SNOOZE/LIGHT button to
enter the Auto-Dim
Settings Menu.
Program your LCD display to automatically dim during preselected times.
Press the +/- buttons to turn the
Auto-Dim feature on or o. Press
SNOOZE/LIGHT to confirm.
Press the +/- buttons to adjust the
starting hour. Press SNOOZE/LIGHT
to confirm.
Press the +/- buttons to adjust the
stopping hour. Press SNOOZE/LIGHT
to confirm and exit.
The icon will appear on the LCD when activated.
BASICS BASICS
Display Mode Options
Full Weekday
& Calendar
Full Weekday
Outdoor & Indoor Temperature
Weekday, Month, Date,
Outdoor & Indoor Temperature
Full Weekday
& Indoor Temperature (No sensor)
To Next Page
Loading...
