EasyManuals Logo

La Crosse Technology EH-23SA E Howard User Manual

La Crosse Technology EH-23SA E Howard
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
E HOWARD ATOMIC WATCH
Watch
Change Time Zone
The NIST (National Institute of Standards and Technology-Time and Frequency Division) WWVB radio
station is located in Ft. Collins, Colorado, and transmits the exact time signal continuously at 60 kHz.
For information about WWVB visit: bit.ly/AtomicTime
Analogue display
Recessed
Button
Push-piece
Button
Digital LCD
Normally upon purchase, the watch will be set to Pacific Time. You may select your time zone manually to
time zones around the world.
1. Hold the
RECESSED BUTTON
for about 3-4 seconds. The current hour is shown at the right of
the display. The left side displays the current time zone selection.
2. Press and release the
PUSH-PIECE
to reach your desired time zone.
3. Once you have selected your correct time zone, to exit this setting press and release the
RECESSED BUTTON
or wait about 15 seconds without pressing any buttons and the watch will
automatically return to its normal display setting.
Atomic Analog Watch
Abbreviation
Time Zone
HA
Hawaiian
AK
Alaskan
P
Pacific
M
Mountain
C
Central
E
Eastern
-4
Atlantic
This image shows
9:00am Central Time.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the La Crosse Technology EH-23SA E Howard and is the answer not in the manual?

La Crosse Technology EH-23SA E Howard Specifications

General IconGeneral
BrandLa Crosse Technology
ModelEH-23SA E Howard
CategoryWatch
LanguageEnglish

Related product manuals