EasyManua.ls Logo

La Crosse Technology WT-3129Bx1 User Manual

La Crosse Technology WT-3129Bx1
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
12 “ Atomic Wall Clock
Model: WT-3129Bx1 | WT-3129Sx1
DC: 101316
Power up
Select Time Zone and DST ON or OFF.
Insert 1 AA battery into the movement.
OPTIONAL: Insert 2 AA batteries in the side
compartments, for up to 3 year battery life.
For best reception, place clock on a wall that faces
Ft. Collins, Colorado.
During the night, your clock will set itself.
IMPORTANT:
• Hands will move to 12:00 and search for the
atomic time signal.
• If no signal, after 8-10 minutes, clock will run from
12:00.
• Clock will search for atomic time signal again, after
midnight, when signal is strongest.
• Allow up to 5 nights for the clock to receive the
atomic time signal.
4
3
2
1
For information about WWVB, atomic time signal visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm

Other manuals for La Crosse Technology WT-3129Bx1

Question and Answer IconNeed help?

Do you have a question about the La Crosse Technology WT-3129Bx1 and is the answer not in the manual?

La Crosse Technology WT-3129Bx1 Specifications

General IconGeneral
DisplayLCD
Atomic TimeYes
Temperature DisplayYes
Temperature Units°F / °C Selectable
Humidity DisplayYes
Power Source2 x AA Batteries (Not Included)
AlarmYes
SnoozeYes
TypeAtomic Clock
CalendarDate, Day of the Week
Time Display12/24-hour format

Summary

Power Up and Initial Setup

Select Time Zone and DST

Configure time zone and Daylight Saving Time settings for accurate time display.

Battery Installation and Life

Insert the primary AA battery and optional batteries for extended power.

Optimal Clock Placement

Position the clock facing Ft. Collins, Colorado, for the strongest atomic time signal.

Automatic Signal Acquisition

Clock automatically sets itself at night, searches for signal, and may take several nights.

Manual Time Setting and Reset

Setting Clock Hands Manually

Use the SET button to adjust time manually, which is overridden by the atomic signal.

Resetting the Clock

Press the RESET button on the movement case if the clock malfunctions.

Specifications and Maintenance

Battery Requirements

Details on required and optional batteries for clock operation and battery life.

Battery Care Guidelines

Best practices for battery usage, replacement, and handling to ensure optimal performance.

Warranty Information

Information on the product's limited time warranty and customer support contact.

Related product manuals