Do you have a question about the La Crosse C80994 and is the answer not in the manual?
Display Type | LCD |
---|---|
Power Source | Battery (2 x AA, not included) |
Alarm Type | Daily alarm with snooze |
Temperature Display | Yes |
Humidity Display | Yes |
Snooze Function | Yes |
Backlight | Yes |
Time Format | 12/24 hour format |
Unplug clock for 15 minutes or press the physical RESET button on the back.
Choose from English, Spanish, French, or German via the program menu.
Adjust backlight to 5 levels: OFF, 1.5%, 20%, 50%, 100% using the DISPLAY button.
Test in dim room to ensure backlight is not set to OFF mode.
Set backlight to dim automatically to level 1 at a specific hour.
Simulates sunset with dimming and color shifts over 30 minutes.
10-minute breathing exercise with color changes and LCD feedback.
Color changes based on indoor humidity for room comfort monitoring.
Light cycles through all available glow colors automatically.
Manually choose a specific color for the glow light from a provided list.
Use the program menu to set the correct manual time.
Adjust time via program menu for Daylight Saving Time changes.
Configure greeting, language, time, date, and temperature unit upon first use.
Hold the SET button for 3 seconds to enter settings without initial greeting.
Hold LIGHT ALARM button to enter mode, adjust hour and minutes, then confirm.
Light Cycle begins 30 min before alarm, gradually brightening to full brightness until alarm is turned off.
Toggle LIGHT ALARM on/off using the LIGHT ALARM button. Words LIGHT ALARM indicate active status.
Light adjusts brightness level based on time remaining before alarm, may cause a 'jump'.
Hold SOUND ALARM button to enter mode, adjust hour, minutes, and snooze time (5-120 min).
Gentle melody alarm increases volume over 5 min. Turn off by pressing any button except SNOOZE.
No, the only sound option is the pre-set melody.
Toggle SOUND ALARM on/off using the SOUND ALARM button. Words SOUND ALARM indicate active status.
Tap SNOOZE button to snooze Sound Alarm for selected 5-120 minutes.
1 Amp USB charging port. Use included adapter. Supports 1A devices or self-regulating.
Ensure your phone charge cord is attached correctly.
Tap SNOOZE/LIGHT to check backlight level. Clock must use power cord for backlight to stay on.
Check power cord connection. Try unplugging for 1-2 hours and pressing buttons 20 times.