7
6. Operang the SWIFT EPS
B
6.1 SWIFT EPS
B
Once the portalter is
engaged, press one of the
start buons located at the
front of the SWIFT EPS
B
.
The right and le buons
correspond to the right and
lebean hoppers. Coee will
be ground, dosed, and tamped
from one of these locaons,
depending on which buon
you press.The red indicator
lights located above the
start buons are illuminated
when the SWIFT EPS
B
is
grinding and tamping. Once
the red light corresponding
to the buon selected is no
longer illuminated, you may
remove the portalter from
the SWIFT EPS
B
and engage
it into the espresso machine.
The SWIFT EPS
B
tamps the
coee as it is ground. When
the volume of groundcoee
in the portalter reaches
the set level, the grinding
motorturnso.Thetamping
motor connues to run for
1-3 seconds, “polishing” the
tampedcoee.
6.2 SWIFT S/D
The SWIFT is now available in
a Single/Double dose version
which permits dosing and
tamping into specic lters
for either single or double
doses.
Selecttherightorlebean
hopper.
Removepreparedportalter.
SINGLE L116/A/S
DOUBLE L115/A/S
Externallythismodelappears
likethestandardversion,but
the internal impeller, which
deposits and presses the
coee,issmallerindiameter
so that it does not get stuck
insideasinglelter.
To Next Page
Loading...
Need help?
General
