espresso coffee machines
35
LSI 089 - Rev. 00 - Ed. 04/2015
After confirming the setting, the program passes onto the settings for the softener
FILTER menu.
The display will show:
Where “Y” (Yes) will be flashing. To select “N” (No) press one of the 2 arrow keys
, “N” will start to flash. If you press the button the control of the sof-
tener filter remains deactivated, quitting the programming function and returning to
the initial screen.
If you confirm with “Y”, pressing the button
, enables the control and allows the
setting of the number of softener litres, after which it is necessary to replace the filter.
The number decreases at every delivery operation. The display must read:
Where the first “0” on the right is flashing. When the button
is pressed, this in-
creases the number (0 - 9), while pressing the button
moves onto the most im-
portant digit on the left (the selected digit flashes to indicate that it can be changed).
Once the litre value has been set, confirm the setting by pressing the button
. At
this point it is possible to enter a minimum number of litres, after which the appliance
will display an alarm on the control panel (6) by switching on the relevant control light.
The display will read:
Fig. 20
Fig. 21
Fig. 22
To Next Page