espresso coffee machines
36
LSI 089 - Rev. 00 - Ed. 04/2015
Where the first “0” on the right is flashing. Pressing the button will increase the
number (0 - 9), while pressing the button
moves to the most important digit on
the left (the selected digit will flash to show that it can be changed). Once the litres
value has been set, confirm the setting by pressing the button
, and it is possible
to quit the programming function.
Take note!
The number cannot be greater than or equal to the maximum number of sole-
noid valve cycles set previously.
With the controls enabled and the display connected, the display will show the re-
maining number of cycles before it is necessary to proceed with maintenance.
Or the number of litres remaining before the softener FILTER cartridge needs to be
replaced:
Fig. 23
Fig. 24
To Next Page