Activity Guide
Tech-Design by Lab-Volt 3
Flight Simulation Aviation
Introduction Flight
Open the ight simulation software.1.
The Getting Started screen appears. From the Main Menu to the left of this screen, click on 2.
Missions.
On the Mission screen, select Tutorial 1: First Takeoff from the list that appears under Title.3.
Click on Go to Brieng. Read the brieng that appears in the Overview. When you are nished 4.
reading, click on Fly!
Listen to your instructor and follow his instructions. When you are nished ying, press the Esc key 5.
on your keyboard. Select End Mission.
Exit the software by clicking on the ‘X’ that appears in the upper right hand corner and select Yes. 6.
Go to the next section in the multimedia presentation.7.
To Next Page
Loading...
