Activity Guide
Tech-Design by Lab-Volt 9
Flight Simulation Landing
Landing
Open the ight simulation software.1.
From the Main Menu, click on Learning Center.2.
Select the Lessons tab from the Learning Center screen. Under Student Pilot, select Lesson 6: 3.
Landings. Read the lesson. When you are nished, click on Fly This Lesson Now.
Read the ight brieng and click on Fly Part 1 Now. When you are nished go back and select Fly 4.
Part 2 Now.
Follow your instructor’s instructions and have fun.5.
When you are done ying, select Flights>Exit (from the Menu bar). Click on Yes to exit the ight 6.
simulator. Remember, you need to press the ALT key to view the Menu bar if you are in full-screen
mode.
Go to the next section in the multimedia presentation.7.
To Next Page
Loading...