EasyManua.ls Logo

Lab-Volt TECH-design E Series - Basic Robotics; Using RoboCIM

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Activity Guide
Tech-Design by Lab-Volt 5
Flight Simulation Controls and Instruments
Flying the Plane
Try taking off and ying the plane. Start by moving the throttle forward, and watch the engine RPM 1.
increase in the Tachometer.
Release the brakes by pressing the period (.) key.2.
When the plane reaches about 60 knots per hour, pull back on the yoke to allow the plane to 3.
become airborne. Keep the nose up and the wings level. Observe the attitude indicator.
When you reach about 1500 feet, start making a right 180° turn. Level off at about 2500 feet. 4.
Observe and become familiar with the ight instruments, and enjoy the thrill of ying.
When you are done ying, select Flights>Exit (from the Menu bar). Click on Yes to exit the ight 5.
simulator. Remember, you need to press the ALT key to view the Menu bar if you are in full-screen
mode.
Go to the next section in the multimedia presentation.6.

Other manuals for Lab-Volt TECH-design E Series