Labconco Guardian 1000/1 - Optional Feature Events; Close Sash; Mains Fail (Optional); Temperature (Optional)

To Next Page

To Previous Page

Close Sash

• When input configured as Close Sash is activated

• Red LED on

• Close Sash toggles on /off with display

• Audible alarm sounds (after pre-set time)

• Audible can be muted via Enter pushbutton -- this silences the alarm if configured.

Mains Fail (Optional)

• When the input configured as Mains Fail is activated

• Red LED on

• Mains Fail is displayed

• Audible alarm sounds

• Audible can be muted via Enter pushbutton -- this silences the alarm if configured.

Reset when Mains power is provided to monitor

Temperature (Optional)

• When input configured as Temperature is activated (and temp sensor connected)

• Temperature and Airflow displayed – Temp display can be disabled.

• High Temp toggles with Airflow display - Red LED on (Constant) with Audible alarm

• Low Temp toggles with Airflow display - Red LED on (Constant) with Audible alarm