Label ETERNA 90 Series User Manual

7
Operation of the other buttons located on the ET-DSEL program selector panel
REDUCED OPENING DURING WINTER
To reduce the passage opening.
To activate the reduced opening during winter, press once button ;
The symbol
on the display indicates that the function is on.
To disable reduced opening during winter, press once more button
.
F2
CHEMIST'S OPENING (only for model ETERNA 150)
To open the door by a few centimetres.
(Only if the chemist's function was enabled on the automation during installation).
To enable chemist's opening press the F2 button once; the F2 symbol appears on the display.
To disable chemist's opening, press the F2 button once more; the F2 symbol goes o󰀨 on the
display.
F1
Door opening command
Pressing the button F1 will open the door.
The button F1 may open the door even when the "NIGHT LOCK" work program is selected, if the
automation electronic control unit is set accordingly.
F3
It is only used if the ET-DSEL digital programmer manages two automatic doors
The ET‑DSEL digital programmer can independently manage the operation of two ETERNA sliding
automatic doors.
Pressing button F3, you select the door on which the work program is set;
The number 1 appears on the display when door 1 is selected; the number 2 appears if door 2 is
selected.

Label ETERNA 90 Series Specifications

General

Brand	Label
Model	ETERNA 90 Series
Category	Door
Language	English