Labnet BioPette PLUS - Page 10

8 – LABNET BIOPETTE PLUS PIPETTORS
2-1,000 μL pipettors
M
M
4
M
M
4
M
M
4
1. Tip ejector disassembly
• Press the tip ejector pushbutton.
• Turn the tip ejector bush 1/3 turn counter-clockwise.
• Slide the ejector from the plastic arbor.
2. Tip ejector assembly
• Press the tip ejector pushbutton.
• Line the tip ejector up with the plastic arbor.
• Turn the tip ejector bush clockwise until it has fully
latched.
3. Tip ejector adjustment
• Remove the tip ejector pushbutton.
• To increase the ejector length turn the plastic bush
counter-clockwise.
• To decrease the ejector length turn the plastic bush
clockwise.