Need help?Do you have a question about the Labnet ENDURO VE10 and is the answer not in the manual?
Details cleaning agents and methods for the units.
Lists accessories included with the ENDURO VE10 Vertical Gel System.
Lists accessories included with the ENDURO VE10 Electroblotting System.
Steps for cleaning and assembling glass plates for gel casting.
Procedures for placing and securing the gel insert in the casting base.
Instructions on operating the casting stand cams for proper sealing.
Instructions for preparing the resolving gel solution using stock solutions.
Guidance on choosing gel percentage based on protein size separation.
Steps for pouring discontinuous gels into the assembled plates.
Instructions for preparing and pouring continuous gels.
Procedures for loading prepared protein samples into the gel wells.
Instructions for fitting the lid, connecting power, and filling buffer.
Parameters and steps for running the gel electrophoresis.
Steps to assemble the blot sandwich for transfer.
Table detailing buffer volumes needed for different cassette configurations.
Recipes for preparing various stock solutions for SDS PAGE.
Information on different membrane types for blotting applications.
Recipes for native and denatured gel Towbin buffer solutions.
List of available accessories with catalog numbers and descriptions.
Details of available glass plates and spacers.
Specifications and types of available gel combs.
General| Max Voltage | 300 V |
|---|---|
| Dimensions | 28 x 20 x 12 cm |
| Temperature Control | No |
| Gel Size | 10 x 10 cm |
| Materials | Plastic and metal |
| Frequency | 50/60 Hz |
| Capacity | Not Applicable |
| Material | Plastic and metal |
To Next Page
