Labnet BioPette PLUS - Packing; Pipettor Design

2 – LABNET BIOPETTE PLUS PIPETTORS
2. Packing
The pipettors are delivered with the following:
Description Qty/Pk
Instruction manual 1
Quality Control certicate 1
Calibration key 1
Pipettor hanger 1
Identication labels 1
Lubricant (for single-channel pipettor) 1
Ejector cap (for pipettor models P3942-2,
P3942-10, P3942-5000, P3942-10000)
1
Filters (for pipettor models
P3942-5000, P3942-10000)
3
Filters
The 5,000 μL and 10,000 μL pipettors include areplaceable
lter, tted at the bottom of the shaft which prevents
aspirated liquid from entering the shaft and contaminating
the inner surface and plunger. Use of the lter is particularly
important when aspirating and dispensing large volumes
ofliquid. The lter should be replaced if it becomes wet.
3. Pipettor Design
Model Identication
The volume range of the pipettor is shown on the
pushbutton and on the tip ejector bar in multi-channel
pipettors.