Laboga Mr.Hector - Technical Specifications; Input;Output and Effects Loop Data; Tube Configuration and Power; Physical Dimensions and Weight

17
TECHNICAL DATA
INPUTS:
• Guitar input sensitivity:
- High input: -40 dB,
- Low input: -30 dB.
• Input Impedance:
- High input: 1M ohm,
- Low input: 130k Ohm.
OUTPUTS:
• Power Output impedance:
- 2 parallel outputs of 4 Ohm impedance,
- 2 parallel outputs of 8 Ohm impedance,
- 1 output of 16 Ohm impedance.
• Power: 100/50W (switchable), which does not depend on impedance,
• Balanced line signal level output: 0 dBV.
EFFECTS LOOP:
• Effects Loop Send output level: 0 dBV,
• Effects Loop Send output impedance: 100 Ohm,
• Effects Loop Return output level: 0 dBV,
• Effects Loop Return output impedance: 220 kOhm.
TUBES:
• Preamplifier: 4 items 12AX7,
• Power amplifier : 4 items 5881/6L6WGC,
• Power supply: 2 items 5C3S.
POWER SUPLY:
• 230V AC / 50Hz – Mains fuse: slo blo T2,5A/250V,
• 110V AC / 60Hz – Mains fuse: slo blo T6,3A/250V,
• Maximum power consumption: 380VA.
CASE:
• Dimensions: 700mm × 275mm × 255mm,
• Weight: 21 kg.