Laboga Mr.Hector - Key Amplifier Features; Power, Channels, and Inputs; Connectivity and Outputs; Included Package Contents

To Next Page

To Previous Page

AMPLIFIER FEATURES

• power: 100/50 W (switchable),

• tubes used: 4 × 6L6/5881, 4 × 12AX7, 2 × 5C3S,

• two channels: clean and distorted,

• high and low inputs,

• volume controls – clean channel, gain and volume – distorted channel,

• two separate Master Volume controls, selected by footswitch, both channels

use the same tone control including the Mid Switch,

• the same tone control for both channels with Mid Switch,

• footswitch: changes channels and Master Volume,,

• channel switching on relays,

• separate bright switches for both channels,

• series effect loop,

• line level Direct Out with speakers simulation,

• speaker outputs: 2 × 4 Ohm, 2 × 8 Ohm, 1 × 16 Ohm,

• dimensions: 700 × 275 × 255.

WHAT IS IN THE SET

• footswitch,

• stereo-cable connecting footswitch and amplifier,

• power supply cable,

• owner’s manual,

• warranty.