Laboga Mr.Hector - Technical Hints and Usage; Operating Environment and Care; Operation and Power Management; Product Disposal

To Next Page

To Previous Page

TECHNICAL HINTS, PROPER USAGE

• avoid using the amplifier in humid and dusty places

• do not place the amplifier on unstable surfaces

• do not place the apparatus near any heat sources

• do not use the amplifier before connecting it to the right cabinet

• after switching on, wait about 30-60 seconds until tubes get heated

• switch the amplifier off before changing cables

• o not block any of the ventilation openings in order to ensure proper air circulation

• never put any liquid containers near the amplifier

• if any objects should fall on or any liquids should spill into to amplifier, switch the device off

and unplug the power cord immediately

• protect the amplifier from any strikes

• wait about 10 minutes for the tubes to cool down before moving the amplifier

• always use a dry or damp cloth to wipe off the dust. Never use solvents on the amplifier

• use additional devices and accessories according to the manufacturer’s recommendations

• the power supply cord should be unplugged from the outlet during storms or when the device

is left unused for a long period of time

Crossed-out wheeled bin symbol implies that in EU countries, after use, product must

be discarded separately in a special, adjusted place. It concerns both the apparatus

itself as well as other accessories bearing this symbol. Do not discard such products

together with unsorted communal wastes.

In EU countries there are special systems of collecting used electrical products.

Disposing of used electrical products in certain designated places prevents them from being

harmful to the environment and people’s health.

LABOGA

ul. Partyzantow 35/2

51-675 Wroclaw, Polska

www.labogaamps.com

We reserve the right to introduce any technical changes and the changes to this amplifier’s image.

This instruction is actual once it has been printed.