INSTRUCTION MANUAL-CoolSafe Freeze Dryersmodels
Page
9
/
19
AUTOMATIC submenu:
Input PREFREEZE, TIME=XX:XX.
Input the max. pressure, PRESSURE, MAX=XXXX.XXX hpa.
In accordance with the configuration:
Input the first shelf-interval, STEP 1, TIME=XX:XX in hours and minutes.
Input the related STEP 1, SHELFTEMP.=XX in degrees C.
Input the related STEP 1, PRESS.=XXXX.XX hpa (the selected value should be <= 90% off the
earlier selected max-pressure).
These 3 steps are repeated a number of times.
Leave the menu as described under MANUAL submenu.
RELEASE submenu:
Leave the menu as described under MANUAL submenu.
DE-ICE submenu:
Input the DE-ICE, TIME =XX:XX in hour and minutes.
Leave the menu as described under MANUAL submenu.
STOP submenu:
Leave the menu as described under MANUAL submenu.
4.4. Valves and connections
CoolSafe must be used with the top lid of transparent acrylic.
Select the manifolds or chambers to be used from ScanVac freeze drying catalogue
To Next Page
Loading...