GAS HOB
Use :
Simultaneously press in and turn the burner dial anti-clockwise to setting
.
Press the ignition button while maintaining pressure on burner dial for about 20 seconds
to ignite burner and initialise safety thermocouple.
A reduced flowrate position identified by the
mark produces the preset minimum
burner power (low flame).
To turn off, turn the control knob clockwise to the «
» position.
The control knob returns to its initial position, the latching mechanism operates and the
gas safety cut-out is activated several seconds after the burner goes out.
Useful hint
Always choose a burner that matches the diameter of the utensil used.
CAUTION : During use of the cooking surface, accessible parts may become very hot during use.
Warn users of the potential risks.
To Next Page
Loading...
