Lagoon 450 - Page 96

LAGOON 450
ENGINE
94
ENGINE CONTROL LEVER JOYSTICK (For manoeuvring vessel at low speed)
REF DESCRIPTION FUNCTION / OPERATION
3 and 4 In case of twin engine (not in use on this boat)
5CTRL
Selection / deselection of the station
The lever has to be in neutral position for the selection of the station.
Press the button twice briefly to select the station : the led 1 lights up.
To deselect the station press the button twice briefly : the led 1 flashes.
6WARM
Neutral position
Press the button with lever in neutral position : the led 2 lights up.
This function can be disabled by pressing the button briefly while lever is in neutral position.
7 SYNC
Limitation of RPM
Press the button during 2seconds when lever is in neutral position. The red led on the right of
the button lights up
Twin command
Press the button quickly when 2 levers are both in reverse position. We hear a quick beep and
green led on the left of the button lights up.
8HIGH IDLE
Limitation of idle
Press the button briefly. The red led on the right of the button lights up.
ENGINE CONTROL LEVER - JOYSTICK