Operator's Manual – Lighthouse
© LAI GAMES
Page 7
STEP FOUR: Correct positioning of prizes.
STEP FIVE: Reinsertion of Prize Locking Pin.
STEP SIX: Correct positioning of Prize Locking Pin.
Position the Hanging Ties on the
prize arm as shown. Space the prizes
apart on the arms so they well
presented, looking from the front.
Ensure the prizes do not restrict the
viewing of the LED display. Do not
have the prizes spaced more than
„half an arm‟ apart, or the prize arm
will time out and display error Err4.
* NOTE! *
If completely filling the prize arm, start
filling the prize arm from the back and
work your way towards the front.
1. Reinsert the Prize Locking pin by
positioning it in the centre of the
spiral making sure it ALWAYS
stays ABOVE the hanging ties.
2. Re-fit and tighten the Prize
Locking pin (Left-hand thread),
by turning it in anti-clockwise
direction.
Ensure the Prize Locking Pin
ALWAYS remains ABOVE the
Hanging Ties.
* NOTE! *
Correct fitting of the Prize Locking Pin
prevents the prizes from falling of the
arm by shaking or tilting the cabinet.
* NOTE! *
Most small prizes work in this
machine but for very small prizes fit
them in plastic bag or add a
cardboard tag to them to ensure the
sensor picks them up when they fall.
To Next Page
Loading...
Need help?
General