Operator's Manual – Speed Of Light
© LAI GAMES
POWER CORD
The power cord is a standard IEC power cord (as used on computers), that is plugged
in to the power inlet socket at the rear of the machine. The power cord can be
removed for transport.
POWER INLET
The power inlet is located at the rear of the machine, on the left-hand side as viewed
from the rear. It is a standard IEC inlet socket.
MAINS SWITCH
The mains switch is located on the power inlet assembly, along with the mains fuse
and IEC inlet socket.
FUSES- MAIN AC SUPPLY FUSE (1 x 6 AMP FAST BLOW, M205
TYPE)
This fuse is for the main AC supply and is situated in the IEC mains input socket.
PCB’s
For location of all game PCB‟s, refer to the Parts Location diagram page of this
manual.
POWER SUPPLY
The power supply is located at the back of the cabinet, and is accessed from the front
of the machine. It is a 12V 12.5A 150 Watt switching power supply. The Computer
also has its own internal Power Supply.
* WARNING! *
Always Turn OFF Mains power and unplug the game before replacing any fuses.
Always Use the correct rated fuse.
To Next Page
Loading...
General