LAMAR CA-1550–CML - 7 Specifications; 7.1 AC Input Specifications; 7.2 DC Current and Charge Specifications; 7.3 Charge Mode Voltage Settings

7. SPECIFICATIONS
7 SPECIFICATIONS
AC Line Input: 115 volts  10%, 50/60Hz, 14 amperes or
230 volts  10%, 50/60 Hz, 7 amperes
(selectable inside unit)
DC Discharge Current: Capacity
0 - 50 amperes adjustable current
Accuracy
 2% from discharge initiation to cut-off
Constant Current Capacity 0 - 25 amperes adjustable, 35 volt limit
Charge Mode:
Accuracy  2% from charge initiation to completion
Constant Potential Setting Selectable 14.5/28.6 volts, 25 ampere limit
Charge Mode:
Accuracy  2% from charge initiation to completion
Timer: Setting Adjustable from 0 to 999.9 units
Units
Selectable on front of timer from 0.1 to 999.9
Accuracy
 1.0%
Digital Meter Accuracy: Voltmeter   0.2 volts
Ammeter  0.2 amperes
Cooling: Fan cooled
Housing: Compact transit case
Outer Dimensions: Height 14 in. (356 mm)
Depth
15 in. (381 mm)
Width
10 ¼ in. (260 mm)
AC Line Cord:
AWG 14 3 wire grounded, IEC320 connector
6 ft long with 115 volt 15 ampere plug (supplied)
User required to change to 230 volt IEC320 cord if needed
DC Discharge Cable: 4 ft Terminal w/Quick Disconnect Adaptor
Weight: Net 53 lbs. (24.1 kg)
Shipping 58 lbs. (26.3 kg)
Fuses: AC line 20A/250V, type MDA 1 ¼ x ¼ (2)
Charge line 40A/32V, type MDL 1 ¼ x ¼
Discharge 70A/32V, type Littlefuse 0498070
Adaptors Included: Alligator Clip Connector, 24V Aircraft Battery Connector,
and Ring Terminal Connector
CA-1550 CHARGER / ANALYZER - OPERATING MANUAL LI-4159-CML Rev A
Page 36