To Next PageTo Next Page
Need help?Do you have a question about the LAMAR CA-1550–CML and is the answer not in the manual?
Provides a general description of the CA-1550 Charger/Analyzer and its capabilities.
Details the user interface elements, including digital meters and indicator lights.
Instructions on how to configure the unit for 115V or 230V AC operation.
Information regarding the DC battery cable and connector points.
Guidelines for placing the unit and ensuring adequate airflow for cooling.
Explains the relationship between cell voltage, time, and gassing during charging.
Describes the Constant-Current (CI) and Constant-Potential (CP) charging techniques.
Steps and recommendations before initiating a battery charging process.
Details on setting the duration for the charging cycle using the built-in timer.
Guidance on adjusting voltage and current parameters for charging different batteries.
Procedure for adjusting the charge current based on battery type and desired rate.
Information on monitoring the charging process and recognizing when it is complete.
Explains how battery voltage changes during discharge and factors affecting it.
Details the purpose and method for testing a battery's long-term capacity.
Steps required before performing a battery discharge test.
How to set the duration for a discharge test, including automatic completion.
Procedure for setting the voltage threshold that stops the discharge test.
Guidance on adjusting the discharge current based on battery rating and test requirements.
Interpreting the results of a discharge test, including pass/fail indicators.
Specific interpretation of discharge test results for lead-acid batteries.
Specific interpretation of discharge test results for nickel-cadmium batteries.
General information on the importance and schedule for unit calibration.
Step-by-step instructions for calibrating the unit's voltmeter.
Step-by-step instructions for calibrating the unit's ammeter.
Procedure for verifying the accuracy of the internal current shunt.
Information on the adjustable operating range for discharge current.
Routine maintenance tasks and cleaning recommendations for the unit.
Ensuring proper airflow by cleaning vents and fans.
Inspection and maintenance of the unit's DC battery cables and connectors.
Instructions on how to identify and replace blown fuses in the unit.
Recommendations on suitable cleaning agents for the unit's components.
Details on AC voltage, frequency, and current requirements for operation.
Specifications for DC discharge current and constant current charge mode.
Specifications for constant potential charge mode voltage and ampere limits.
Accuracy and setting parameters for the unit's timer.
Accuracy ratings for the integrated voltmeter and ammeter.
Details on unit dimensions, housing, cooling, cords, cables, and adaptors.
Information on the types and ratings of fuses used in the unit.
Details the warranty period, coverage, and limitations for Lamar products.
General| Input Voltage | 100-240VAC |
|---|---|
| Output Current | 15A |
| Number of Outputs | 1 |
| Output Voltage | 12V DC |
| Charging Stages | 3-stage (Bulk, Absorption, Float) |
| Compatible Battery Types | AGM, Gel |
| Protection Features | Short Circuit, Reverse Polarity |
