C
C
OMPUTER
OMPUTER
I
I
NSTRUCTION
NSTRUCTION
BUTTON FUNCTIONS & FEATURES
NOTE: THESE ARE THE BASIC OPERATING FUNCTIONS OF EACH BUTTON. ACTUAL PROGRAMMING FUNCTIONS MAY
REQUIRE AN ACTIVATION SEQUENCE OF MORE THAN ONE BUTTON (REFERENCE : COMPUTER PROGRAMMING ).
[A] RESULTS PAUSES THE COMPUTER AND ALLOWS THE USER TO REFERENCE ALL FUNCTION TOTALS
(ACCUMULATED TIME, DISTANCE, CALORIES AND WATTS). OPTIONAL GRIP CONTROL
[B] RECOVERY ACTIVATES FITNESS TRAINING EVALUATION (USER FITNESS GAUGE). OPTIONAL GRIP CONTROL
[C] QUICK START ALLOWS A USER TO SKIP ALL PROGRAMMING SETUP AND START IMMEDIATE TRAINING IN THE
MANUAL MODE.
[D]
START / STOP ACTIVATES & STOPS COMPUTER FUNCTIONS
[E] DOWN SELECTS PROGRAM MODE & ADJUST (DECREASES) DISPLAY SETTINGS. OPTIONAL GRIP CONTROL
[F]
UP SELECTS PROGRAM MODE & ADJUST (INCREASES) DISPLAY SETTINGS. OPTIONAL GRIP CONTROL
[G]
ENTER SELECTS, SETS, AND ACTIVATES DISPLAY FUNCTIONS.
[H] RESET RESETS PROGRAMMING OPTIONS AND CLEARS DISPLAY VALUES TO ZERO. HOLDING THE
BUTTON DOWN FOR AT LEAST 3 SECONDS WILL CLEAR ALL DISPLAY VALUES, INCLUDING USER
SET UP VALUES.
[I]
BMI ACTIVATES DISPLAY MEASUREMENT (GAUGE) OF A USER’S BODY MASS. NOTE: COMPUTER MUST
BE IN THE STOP MODE IN ORDER TO ACTIVATE BMI READING.
[J]
LCD ILLUMINATED DISPLAY REFERENCES TRAINING GRIDS AND FUNCTION READOUTS.
[K]
READING RACK PULL OUT FEATURE ALLOWS USER ADDED CONVENIENCE.
SPECIAL FEATURES
SELF - GENERATING POWER TO THE BIKE IS GENERATED BY SELF-CONTAINED POWER SUPPLY, WHICH IS ACTIVATED
POWER SOURCE VIA THE ROTATION OF THE PEDALS. NO EXTERNAL AC POWER SUPPLY IS REQUIRED. NOTE: 4 - AA
BATTERIES MUST BE INSTALLED IN THE BACK OF THE COMPUTER IN ORDER TO PROPERLY USE
SOME OF THE SPECIAL DISPLAY FUNCTIONS.
HANDLE / GRIP RIGHT GRIP CONTROLS ALLOW USER TO ACTIVATE RECOVERY AND RESULTS FUNCTIONS.
CONTROLS LEFT GRIP CONTROLS ALLOW USER TO MAKE UP AND DOWN ADJUSTMENTS.
COMPUTER OPERATION PAGE 11
C
D
E F
G
H
B
A
I
J
K
To Next Page
Loading...
