ASSEMBLY PREPARATION / INTRO
PAGE 5
PRODUCT PREPARATION
♦ To ensure ease of product assembly, please take time to verify the size and quantities of all required
assembly hardware. Use the itemized parts listing and hardware chart for reference.
♦ The product assembly process has been documented in easy to follow stages. Please read all assembly
instructions carefully. Take time to review the manual and familiarize yourself with the entire assembly
process before proceeding. Assembly Tip
: It is always helpful to pre-stage the items needed for each
assembly step.
♦ Perform product assembly in a 4ft. x 6ft. flat area. Note: After assembly is completed, allow a minimal of
2-3ft. of space on each side of bike for user access.
♦ Do not dispose of any packaging materials until assembly of the product is completed.
♦ Assembly tools are included, but you may also use standard (similar) household tools to complete
assembly of this product.
♦ If you experience problems with operation of the equipment after assembly, please reference the
troubleshooting guide in the back this manual.
♦ For added component life, follow the preventative maintenance tips listed in this manual.
♦ Make sure to completely fill-out the product registration form & return it to us within 30-days of purchase.
♦ Please contact us if you have additional questions or need service assistance (877.861.2181)
To Next Page
Loading...
