Lamax Electronics S7 Dual - Dashcam Settings

6
10) Parking Camera
If you connect the red cable from the back of the rear camera to the reversing lights, the
parking camera is activated. When reversing, the image from the rear camera plus the re
-
versing lines are automatically displayed.
Recommendation: We recommend you get the red cable installed to the reversing light at
an authorized service centre.
11) Connecting the GPS Module
As soon as the module is connected to the camera and detects a signal, the GPS icon
turns green and the current coordinates appear on the display. On the product page at
www.lamax-electronics.com , download LAMAX Player to play back camera recordings. In
addition to the recordings, the player will display the current speed and the route travelled
on Google Maps.
DASHCAM SETTINGS
In video mode, press the MENU button. The settings are subdivided into two sections:
video settings and camera settings.
1) Video Settings
a) Video Resolution – oers two options HD and full HD at 30 FPS. Press OK to get to the
settings, use the arrow keys to select the desired resolution and conrm with OK.
b) Video Time (loop length) – sets the length of each recording. Camera shoots 1-5 min
-
utes of video. When the memory card is full, the camera starts overwriting the oldest
recordings. Individual videos are continuously linked to each other and do not create
blind spots between loops. Press OK to get to the settings, use the arrow keys to select
the desired loop length and conrm with OK.
c) Delayed Shutdown – allows you to set the delay time between disconnecting the power
and the camera shutting down. This feature is suitable, for example, for cars with a start
-
stop system. Press the OK button to get to the setting and use the arrows to select the
desired delay time, or to turn o the function completely. Press the OK button again to
conrm.
d) Audio Recording – lets you mute the microphone being recorded on the video. For ex
-
ample, when you want to make a private call. This can also be done via a quick function.
Press the OK button to get to the settings and use the arrow keys to turn on or o the
microphone and conrm by pressing the OK button again.
e) Exposure – allows you to adjust the exposure as needed from 0-10. Press the OK button
to get to the setting, use the arrows to select the desired level and conrm with OK.
f) LDWS – is a lane tracking function. Calibrate this feature in the “Camera Settings” menu.
Press the OK button to get to the setting, use the arrows to turn the feature on or o and
conrm with OK.
2) General Settings
a) Language – the LAMAX S7 Dual has a multilingual menu. To change the language, press
the OK button, use the arrow keys to select the desired language and conrm by press
-
ing OK again.
b) Date and Time Settings – sets the current date and date. When you have a GPS module
HR SLO LT HU PL SK CZ DE EN HR SLO LT HU PL SK CZ DE EN