11
1) The ideal location for the rear camera is the upper center part of the rear window.
2) Make sure that the glass is clean and dry at the attachment point.
3) Remove the film from 3M adhesive pad on the camera holder.
4) Before attaching it to the glass, point the camera to capture best view.
6) Connect the rear camera to the switched off front camera with the connecting cable.
sideways to the passenger side and gradually push the cable under the upholstery
using the tool.
UPDATING FIRMWARE
The latest camera firmware can be found in the „Downloads“ section of the product
website: https://www.lamax-electronics.com/t10
UPDATE PROCEDURE
2) Download and open the .zip file containing the “.bin” files. Do not change the files’
names.
3) Copy the “.bin” files to the formatted microSD card.
power supply and making sure the dashcam is powered throughout the update
CONNECT WITH US
Find complete instructions and current firmware and speed
camera databases at:
https://www.lamax-electronics.com/t10
Do not forget to register your product on our website:
https://www.lamax-electronics.com/productupdate
9
10
11
ENCSCSCSCSCSCSCSCSCS
To Next Page
Loading...
