5
BASIC SETTINGS AND FUNCTIONS
Memory card detected
Recording
Memory card missing
Dashcam plugged into power
Battery status
Set loop length
Microphone on
Microphone off
SETTING UP FOR THE FIRST TIME
A
›
Use SD cards from reputable manufacturers of Class U3 and higher with a
›
Remove the card only when the camera is off.
›
The first time you use the card, format it directly in the camera and repeat the
formatting at least once a month to ensure proper camera operation.
B
camera mount.
›
The camera is designed for use only when connected to a power supply.
C
The dashcam turns on automatically and starts recording.
›
For some vehicles, it is necessary to start the ignition first.
3
4
ENCSCSCSCSCSCSCSCSCS
To Next Page
Loading...
