To Next PageTo Next PageWhat to do if Lamborghini Caloreclima ALHENA TECH 34 H shows fume probe fault?
If your Lamborghini Caloreclima Boiler displays a fume probe fault, it could be due to: * Damaged probe: check the wiring or replace the fume probe. * Wiring shorted. * Wiring disconnected.
General| Mounting | Wall-mounted |
|---|---|
| Fuel Type | Natural Gas / LPG |
| DHW Production | Yes |
| Nominal heat output | 34 kW |
| Max working pressure | 3 bar |
| Ignition | Electronic |
| Control | Digital control panel |
| Flue gas outlet diameter | 80/125 mm |
| Power supply | 230 V / 50 Hz |
| Protection rating | IPX5D |
| Type | Condensing boiler |
General overview of the ALHENA TECH H condensing heat generator and its capabilities.
Explains the boiler's control panel layout, buttons, and display symbols.
Details electrical connection, initial boiler startup, shutdown, and mode selection.
Covers user adjustments for winter/summer mode, heating, and DHW temperatures.
Mandates installation by qualified personnel following all manual and legal requirements.
Specifies requirements for installation location, ventilation, and clearances.
Provides instructions for connecting water pipes, safety valve, and flushing the system.
Details procedures for gas conversion, combustion checks, and calibration.
Outlines pre-ignition checks, boiler startup sequence, and combustion analysis.
Lists required periodic checks, extraordinary maintenance, and component replacement steps.
Covers physical dimensions, general views, hydraulic circuit, and wiring diagrams.
Presents technical specifications, performance curves, and ERP fiche.
