Lamona LAM8607 - Rinse Aid: Check and Refill; Setting Rinse Aid Level

8
www.howdens.com
Press and hold
(display counts
down 3,2,1)
Switch Off
to save new
rinse aid setting
Press to select new
rinse aid setting
Press, hold and
release when
display shows
Switch On
Select rinse
aid setting
(P...)
1
2
Cancel
3 sec.
F1
F2
F3
F4
Cancel
3 sec.
F1
F2
F3
F4
Cancel
3 sec.
F1
F2
F3
F4
Cancel
3 sec.
F1
F2
F3
F4
Cancel
3 sec.
F1
F2
F3
F4
Cancel
3 sec.
F1
F2
F3
F4
Cancel
3 sec.
F1
F2
F3
F4
Cancel
3 sec.
F1
F2
F3
F4
eg.
If there are stains on tableware items after washing the level must be increased
and if there is a blue trace after wiping them by hand, it must be decreased.
Adjust the setting from the values 0,1,2,3,4 (factory pre-set, level 3).
Rinse aid helps dry the dishes
without streaks and stains. It is
automatically released during the
hot rinse phase.
Always re-fill just before a wash
programme.
Only use dishwasher rinse aid.
(Changing L option has no effect on this model)
Setting rinse aid level / adding rinse aid
Rinse aid, check and re-fill if display shows .
For optimum
performance we
recommend the use of
dishwasher detergent
with separate rinse aid
and salt.
Blue streaks
• Lower rinse aid setting.