29
5 Operating Control and Displays
NOTICE!
You require access level 2 to make settings in this function!
Accept or discard the entry!
Activate valve leakage test prior to ignition
1. Use cursor keys to select menu and press ENTER to confirm.
2. Change the functional state ON/OFF using cursor keys and press ENTER .
The display shows the valve leakage test menu before ignition:
The valve leakage test is set!
NOTICE!
You require access level 2 to make settings in this function!
Accept or discard the entry!
Activate valve leakage test after flame OFF
1. Use cursor keys to select menu and press ENTER to confirm.
2. Change the functional state ON/OFF using cursor keys and press ENTER .
The display valve leakage test is shown after flame OFF menu.
The valve leakage test is set!
NOTICE!
You require access level 2 to make settings in this function!
Accept or discard the entry!
Fig. 5-32 Valve leakage test prior to ignition menu
1 Valve leakage test before ignition picto-
gram
2 Display valve leakage test (ON)
3 Press ENTER to accept settings
Fig. 5-33 Valve leakage test after flame OFF menu
1 Valve leakage test after flame OFF picto-
gram
2 Display valve leakage test (ON)
3 Press ENTER to accept settings
To Next Page
Loading...
