Lamtec FMS 4 - FMS Operating Principle; FMS Digital Inputs; FMS operating sequence

10
2 Comissioning
2 Comissioning
2.1 O2-Regulation
Resetting od: Manually
Switch to "O
2
regulation” mode.
Press the Acceptance key and call up error text
Push key 3 (2) upwards → error deleted.
WARNING!
If deleting an error, the error text must always first be called up by pressing the "Enter" key.
Automatically:
During each new burner start-up
Calling up O2-
regulation text
messages
switch display to O
2
-Regulation
turn Selection switch (1) to „Status“,
push channel key 3 (4) upwards
Calling up the indication by pressing the „Enter“- key (3).
Back → press „Enter“- key again (3),
or turn selection switch (1) to another position.