Lamtec LT3-F - Conversion of the Output Range via the User Interface

73
10 Options
10.1.3 Conversion of the Output Range via the User Interface
Access level 1 required.
In the MAIN MENU, select to make set-
tings.
In SETTINGS, select for analogue out-
puts.
Analogue outputs offer setting possibilities
for
current range or voltage range.
Output range.
Selection of the current or voltage range
according to module.
Output ranges for:
O
2
= O
2
measured value
CO
e
= CO
e
measured value
η = efficiency
T-ex = flue gas temperature