Lancom GS-1108 - Appendix; Performance and Characteristics

LANCOM GS-1108
쮿 Chapter 3: Appendix
6
EN
3 Appendix
3.1 Performance and characteristics
LANCOM GS-1108
Standards Media 10BASE-T: UTP Cat. 3, 4, 5 or better
100BASE-TX: UTP Cat. 5 or better
1000BASE-TX: UTP Cat. 5 or better
IEEE IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-TX
ANSI/IEEE IEEE 802.3 Auto-negotiation
Operating modes Switching Store and forward
Auto MDI/MDI-X Yes
Transfer mode 10/100Mbps, full/half-duplex (auto-sensing)
1000Mbps, full duplex
Transfer rate 10Mbps: 14880pps (64-byte packets)
100Mbps: 148800pps (64-byte packets)
1000Mbps: 1488000pps (64-byte packets)
Flow control IEEE 802.3x flow control for full-duplex
Back pressure in half-duplex operation mode
Display LEDs for Power, Link/Act, Speed
Hardware Power supply 100 - 240V, 50 - 60Hz, internal power supply unit
Environment Temperature range 0-40°C; humidity 0-90 %; non-condensing
Housing Metal housing, connections on the front; measures 197.2x
35.2 x 120 mm (W x H x D)
Power consumption (max.) max. 10 Watt
Weight 1kg
Approvals Conformity CE conform with DIN EN 55022 and DIN EN 55024
RoHS Compliance
Package content Cable IEC cable
Manual Printed Quick Installation Guide (DE/EN)
Item numbers LANCOM GS-1108 61457