Need help?Do you have a question about the Lancom GS-2310P and is the answer not in the manual?
General| PoE Power Budget | 130 W |
|---|---|
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Addresses | 8K |
| VLANs | 4K |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| PoE | 802.3af/at |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 70°C |
| Jumbo Frame Support | Supported, up to 9, 216 bytes |
Configure detailed port parameters like link status, speed, and flow control.
Configure Access Control Lists for packet filtering and traffic management.
Prevent network loops with STP for loop detection and prevention.
Optimize multicast traffic forwarding and bandwidth management with IGMP Snooping.
Optimize IPv6 multicast traffic and bandwidth management with MLD Snooping.
Explains LLDP for enabling switches to advertise themselves to adjacent devices.
Covers MAC table information, static MAC learning, and dynamic MAC entries for frame switching.
Explains how to configure VLAN memberships and port settings for network segmentation.
Details the configuration of Voice VLANs for prioritizing voice traffic and ensuring quality.
Covers QoS features like queues, classification, policing, shaping, and remarking for traffic prioritization.
Configure PoE settings for powering network devices, including status and scheduling.
Describes how to configure Loop Protection to detect and prevent network loops.
Manage user accounts, passwords, and privilege levels for switch access.
Configure IPv4 and IPv6 addresses, subnet masks, and gateways.
To Next Page
