Lancom GS-2310P - Status

5. Click Apply to save the setting
6. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values
Figure 3-5.3: The IGMP Snooping Port Group Filtering Configuration.
Parameter description:
Delete:
Check to delete the entry. It will be deleted during the next save.
Port:
To activate the port enable the IGMP Snooping Port Group Filtering function.
Filtering Groups:
The IP Multicast Group that will be filtered.
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.5.4 Status
After you complete the IGMP Snooping configuration, you can display the IGMP Snooping Status.
Web Interface
To display the IGMP Snooping status in the web interface:
1. Click Configuration, IGMP Snooping, Status
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.
3. Click “Refresh“ to refresh the IGMP Snooping Status.
4. Click “Clear“ to clear the IGMP Snooping Status.
Figure 3-5.4: The IGMP Snooping Status.
47
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration