Parameter description:
Group Name:
The field describe the Trap Event definition.
Severity Level:
To scroll to select the event type with “Emerg, Alert, Crit, Error, Warming, Notice, Info and Debug”.
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.22 SMTP Configuration
The function, is used to set a Alarm trap when the switch alarm then you could set the SMTP server to send you the
alarm mail.
Web Interface
To configure the SMTP in the web interface:
1. Click Configuration, SMTP Configuration
2. Select the Severity Level
3. Specify the parameters in each blank field.
4. Click Apply to save the setting
5. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values.
Figure 3-22.1: The SMTP Configuration
135
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
To Next Page
Loading...
