Lancom GS-2310P - Time; Manual

Parameter description:
Auto-refresh
Activate the auto-refresh to refresh the log automatically.
4.2 Time
This page configures the switch’s time. Local Time Configuration and NTP Configuration is supported.
4.2.1 Manual
The switch provides manual and automatic ways to set the system time via NTP. Manual setting is simple and you just
enter “Year”, “Month”, “Day”, “Hour”, “Minute” and “Second” within the valid value range indicated in each item.
Web Interface
To configure Time in the web interface:
1. Click Time, Manual.
2. Specify the time parameters.
3. Click Apply.
Figure 4-2.1: The time configuration
141
LANCOM GS-2310P/GS-2326(P) User Manual
4 System Configuration